LG 39LY540H-CA Installation Manual page 28

(4) 15Min Auto Off
When '15Min Auto Off' is set to 'Enable', TV will turn off if there is no signal in 15Min.
y
(5) Auto Sensing
-If 'Auto Sensing' is set to 'To Set ⊙ ', the input is automatically switched when the input signal that
y
you set to 'ON' is received.
If 'Auto Sensing' is set to 'Disable', the input is not switched when the input signal is received.
y
If SIMPLINK is set to On, HDMI is automatically set to Disable and can not work.
y
If the signal is removed while Auto Sensing (automatic input switch) is enabled, the input returns to
y
the previous setting.
If the several inputs are connected by enabling Auto Sensing and the automatic input switch is
y
performed several times, the input returns to the previous setting only for the last input and does
not repeat the operation for the rest.
For the AV input connected using the euro scart cable, Auto Sensing does not work for the TV
y
input because the Auto AV function is enabled.(For other inputs, Auto Sensing works normally.)
(6) Forced DVI Audio
When Forced DVI Audio is selected, the audio signal from the HDMI port will be transmitted
y
through the RGB, AV, or Audio In #1 component ports.
The video signal will be transmitted through HDMI to be displayed on the screen in standard
y
quality.
For the audio signal, the priority order is the RGB -> AV -> Audio In component ports.
y
(7) Screen Saver Cube
When 'Screen Saver Cube' is set to 'No', TV will do not display LG Screen Cube.
y
28