Table of Contents
Advertisement
Installer Setting-Dry Contact Mode Setting
Dry contact function is the function that is possible to use only when dry contact equipment is
separately purchased/setup.
NOTE
!
What is Dry Contact?
Like hotel card key and body perception sensor, it is the signal of the point of contact when
using air-conditioner by interlocking.
- Please refer to dry contact manual for more details.
*
Remote controller image may different upon models accordingly.
INSTALLATION INSTRUCTION
If pressing
button long for 3
1
seconds, it enters into remote
controller setter setup mode.
- If pressing once shortly, it enters
into user setup mode. Please press
more than 3 seconds for sure.
If pressing
button repeatedly, it moves to
2
remote controller dry contact mode setup
menu as picture below.
Select Dry contact setting by
3
pressing button.
(00 : Automatic, 01 : manual)
Function Code
Dry Contact
setting value
Press
button to save.
4
5
Pressing
button will exit settings mode.
After setup, it automatically gets out of
setup mode if there is no button input for
25 seconds.
When exiting without pressing set button,
the manipulated value is not reflected.
27
Advertisement
Table of Contents
