Using Your Aquatrio; Cleaning Floors - Philips FC7070/01 User Manual

Put the cap back on the clean water tank and
6
turn the cap clockwise to fix it.
lift and hold the lever (1) and slide the clean
7
water tank back into the appliance completely
(2). Then press down the lever (3) to lock the
clean water tank into place ('click').
4.1.1 Important to know
•
When you have filled the clean water tank,
make sure the lever is closed properly. If
the lever is not locked properly, the clean
water tank may fall out when you release the
appliance from its parking position.
• When you switch on the appliance after filling
the clean water tank, it can take a little while
before water comes out of the nozzle. The
tank full/tank empty light may flash a few times
and the appliance may switch off automatically.
If this happens, switch on the appliance again.
10

5 Using your AquaTrio

5.1 Cleaning floors
Before you start cleaning your floors, clear the
1
floor of loose objects such as toys, magazines
and shoes. Move aside the mains cords of
other appliances.
Turn the cord storage hook downwards and
2
remove the mains cord. Put the mains plug in
a wall socket.
Press the parking position release button
3
and release the appliance from parking
position. To avoid bending your back, press the
parking position release button with your foot.
Push the unlock slide forwards (1) and press
4
and hold the power-on button (2). You can
release the unlock slide when the appliance
switches on (3), but keep the power-on
button pressed during cleaning (4).