Power Supply - Samsung SNH-V6430BN User Manual

Power Supply

Using the PoE adapter
1. Push to insert the included PoE adapter in the power
plug, as shown in the figure below.
2. To remove the power plug from the PoE adapter,
press the [PUSH] section as shown in the figure
below, and push up the power plug.
3. Connect the LAN cable from the PoE adapter [DATA & POWER OUT]
socket to the PoE socket.
12 · English
4.
Connect the LAN cable from the PoE adapter [DATA IN] socket to the LAN
port of the router.
n
When connecting the camera wirelessly via Wi-Fi Direct, remove the LAN cable
connecting the PoE adapter and the router.
5.
Plug the PoE adapter into an electrical outlet.
n
Use the PoE adapter and power plug that have been included with the camera. Using
an incompatible adapter may cause the camera to malfunction.
It takes about 30 seconds to reboot the camera completely.
When the camera is turned on, the LED blinks red.
❖ LED status
LED indicator shows operational status with colors.
Refer to table below for detailed meaning of the LED indicator.
Color
Red
Red Blinking
Blue Blinking
Blue
Green
Yellow/Orange
Purple
<Router>
Status
Booting up
Booting completed / Establishing network connection
Connecting to the network.
Local connection established
Connection to server completed / Normal operation
Waiting to connect with a wireless router
Updating firmware