Samsung SNH-V6430BN User Manual page 28

Item
Converts the current image to full screen size.
m
The system supports Internet Explorer only.
Full screen
If you double-click the screen, the full screen mode is terminated.
n
Brightness You can adjust the brightness of the screen image.
Hide/unhide detailed
o
Click on the [ ] icon to unhide or hide detailed setting menu.
menu
Adjust the volume of the built-in microphone and speaker of the
camera as appropriate.
If you set the mic setting to '0', you will not hear the live audio, and
p
it will not be recorded in your SD card. Note that the Two-way audio
Audio
transfer function is available only with the smart phone application.
The SNH-V6430BNH model does not support a speaker or the
interactive audio function.
q
Add a camera Click the [ ] icon to register an additional camera.
❖ Wireless Network Speed
Profile Name Resolution
Low Speed Network VGA
Mid Speed Network HD(720P)
High Speed Network Full HD(1080P)
28 · English
Description
Recommended
Frame rate
bandwidth
10 fps 0.7Mbps
15 fps 1.5Mbps
30 fps 3.5Mbps
n
What is relay mode?
If the network condition is unstable, the camera cannot make a normal connection
(P2P), so it will set up a connection in relay mode. In this case, you will see the video
for the first seven minutes only.
Relay mode is added feature where the video from the camera is transmitted to
Samsung server then retransmitted to the user's computer.
If you have trouble connection to the camera, visit "http://www.samsungsmartcam.
com", go to support page, and refer to "Troubleshooting" on it.
It is recommended to use one browser at one time.
The Night Vision video produces a different visibility according to the distance between
camera and subject.
The number of available concurrent users for a single camera may vary depending on
the speed of your Wi-Fi router.
❖ Motion Zone Setting
1) Click the < > icon.
2) Drag it to the screen to set the detection area.
3) Click on <OK>.
If you want to delete the set area, click on <Delete All>.
n
The <Motion Detection> function needs to be activated in order to use the motion
zone function.
You can set up to 3 motion zones.