Samsung ST200F Service Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Digital Camera
  5. SAMSUNG ST200F
  6. Service manual

Samsung ST200F Service Manual

Digital camera
Hide thumbs Also See for ST200F:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Manual Del Usuario
DIGITAL CAMERA
SAMSUNG ST200/ST200F
SERVICE
Manual
DIGITAL CAMERA
CONTENTS
1. Repair information
2. Product specifications
3. Disassembly and reassembly
4. PCB diagrams
5. Block diagram
6. Firmware update
7. Adjustment
8. Exploded view and parts list

Advertisement

Table of Contents
loading

Related Manuals for Samsung ST200F

Summary of Contents for Samsung ST200F

  • Page 1 DIGITAL CAMERA SAMSUNG ST200/ST200F SERVICE Manual DIGITAL CAMERA CONTENTS 1. Repair information 2. Product specifications 3. Disassembly and reassembly 4. PCB diagrams 5. Block diagram 6. Firmware update 7. Adjustment 8. Exploded view and parts list...

  • Page 2: Table Of Contents

    Contents 1. Repair information 1-1 Customer satisfaction statement ..........1-1 1-2 Warranty and repair service information ........1-1 1-3 Precaution for disassembly and reassembly .......1-4 2. Product specifications 2-1 Specifications ................2-1 2-2 Product comparison ..............2-2 2-3 Accessories information ............2-3 2-4 About the memory card .............2-5 2-5 About the battery ..............2-6 3.
  • Page 3 Contents 6. Firmware update 6-1 Product reset ................6-1 6-2 Version check ................6-3 6-3 Upgrade ...................6-4 7. Adjustment 7-1 Basic guide for adjustment ............7-1 7-2 Lens shading ADJ ..............7-3 7-3 Shutter close time ADJ ..............7-4 7-4 Flash ADJ .................7-5 7-5 Punt ADJ ..................7-6 7-6 Vertical line ADJ ...............7-8 7-7 CCD defect ADJ ................7-9 7-8 OIS centering ADJ ..............7-9...

  • Page 4: Repair Information

    In the event that a valid date of purchase is not available, the warranty period will be determined by the date of manufacture. The warranty period shall be decreased to three months from the original product manufactured date. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 5 Our liability under this warranty shall be limited to the following: a. In the event of a same malfunction problem within two months after repair service by Samsung authorized technician, we will repair or replace free of charge the component of the product which is found to be defective.
  • Page 6 Defect occurring after the expiration of the Warranty Period. b. Damage due to negligence, immersion in water, impact, loss and tampering. c. Repair or alteration performed by any party other than Samsung authorized technicians. d. Misuse or other improper use of the power button.

  • Page 7: Precaution For Disassembly And Reassembly

    Use an anti-static mat as well as an anti-static wrist strap to avoid ESD damage to PCB. The use wooden or plastic tweezers is recommended for manual placement. CONNECTOR Metal tip tweezer might make marks or damage. BARREL Always follow proper direction while assembling the components of the barrel. Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 8: Product Specifications

    • Tele: 0.5 m-2.0 m (ISO Auto) ISO Range Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600, ISO 3200 Samsung 10X Zoom Lens f= 4.85~48.5mm Focal Length (35mm film equivalent : 27~270 mm) • Internal memory: Approx. 16 MB •...

  • Page 9: Product Comparison

    Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800, ISO ISO Range 1600, ISO 3200 1600, ISO 3200 Samsung 10X Zoom Lens f= 4.85~48.5mm Samsung Lens f = 4.5–22.5 mm Focal Length (35mm film equivalent : 27~270 mm) (35 mm film equivalent: 25–125 mm)

  • Page 10: Accessories Information

    AD39-00190A AD39-00191A Battery AD43-00199A Packing items BLACK AD63-02604A Strap SILVER AD63-02596A User Manual CD-ROM AD46-00433A ST200F_EUR1 AD68-06850A ST200F_EUR2 AD68-06851A ST200F_EUR3 AD68-06852A ST200F_ASIA AD68-06853A Quick Start Guide ST200F_S.CHI AD68-06849A ST200F_CANADA AD68-06854A ST200F_ENG_TUR AD68-06856A ST200F_SEA AD68-06855A Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 11 <Table. 2-4 Optional items information> image Description Parts No. CC9S70B AD69-03284A CC9S71N AD69-03285A CC9S30B AD69-03283A Camera case AD69-02964A CC9U21B/P AD69-03010A Optional items CC9U11B AD69-02397B A/V cable AD39-00191A Battery charger AD44-00176A 1109-001446 1109-001420 Memory card 1109-001418 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 12: About The Memory Card

    (ST200F only) * The figures above are measured without using the zoom function. Available recording time may vary if you use the zoom. Several videos were recorded in succession to determine the total recording time. Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 13: About The Battery

    Approx. 90 min Record videos at resolution and 30 FPS. • The figures above are measured by Samsung’s standards. Your results may differ, depending on your actual usage. • Several videos were recorded in succession to determine the total recording time.

  • Page 14: Disassembly And Reassembly

    SCREW (M1.4 L4.5 TAPPING) 6003-001717 SCREW (M1.4 L3.5 TAPPING) 6003-001630 SCREW (M1.4 L4.5 TAPPING) 6003-001717 3-10 SCREW (143025) 6003001633 3-11 SCREW (143525) 6003-001630 3-27 SCREW (143525) 6003-001630 3-28 SCREW (143525) 6003-001630 3-29 SCREW (143025) 6003-001633 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 15: Disassembly Of Main Unit

    (b) Remove the one SCREW on the left side. SCREW(M1.4 L3.5 MACHINE) Fig. 3-2 (c) Remove the DECO FRONT GRIP and then remove the one SCREW on the right side. SCREW(M1.4 L4.5 TAPPING) DECO FRONT GRIP Fig. 3-3 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 16 (d) Run a safe open pry tool around the join of LOCKING PART to release the BACK COVER as illustrated in image. Slightly wiggle the LOCKING PART to widen the gap. You'll have to apply a little force to remove it. Fig 3-4 (e) Remove the BACK COVER ASSY. BACK COVER ASSY Fig 3-5 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 17 Remove the FPCB from the connector. FPCB KEY PCB ASSY Fig. A Fig 3-6 3. Disassembly of MAIN FRAME. (a) Remove the six SCREWs. SCREW(M1.4 L4.5 TAPPING) SCREW(M1.4 L4.5 TAPPING) SCREW(M1.4 L3.5 TAPPING) Fig 3-7 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 18 (a) Remove the CONNECTOR as indicated " Fig. A" below and then remove the LCD ASSY. LCD ASSY Remove the FPCB from the connector. 1. Open. 2. Remove. FPCB FPCB Fig. A Fig 3-9 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 19 5. Disassembly of BARREL ASSY and MAIN PCB ASSY. (a) Remove the CONNECTOR as indicated " Fig. A" below. Remove the FPCB from the connector. FPCB FPCB Fig. A Fig 3-10 (b) Remove the BARREL-MAIN PCB ASSY. BARREL_MAIN PCB ASSY Fig 3-11 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 20 Remove the FPCB from the connector. 1. Open. 2. Remove. FPCB FPCB FPCB FPCB Fig. A Fig. B Fig 3-12 (d) Remove the BARREL ASSY with MAIN PCB ASSY. BARREL ASSY MAIN PCB ASSY Fig 3-13 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 21 Disassembly and reassembly 6. Disassembly of CHAMBER ASSY. (a) Remove the one SCREW. SCREW(M1.4 L4.5 TAPPING) Fig 3-14 (b) Remove the CHAMBER ASSY. CHAMBER ASSY Fig 3-15 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 22 7. Disassembly of TOP PCB ASSY. (a) Discharge. CAUTION It must be processed for discharge to the main condenser as shown in the below picture. Discharging Fig 3-16 (b) Remove the two LOCKs. Fig 3-17 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 23 Disassembly and reassembly (c) Remove the TOP PCB ASSY. TOP PCB ASSY Fig 3-18 3-10 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 24: Disassembly Of Barrel

    (d) CUSHION-IR FILTER (c) CUSHION-IR (b) PCB FPC-CCD ASSY (a) SCREW (143025) Fig 3-19 2. Disassembly of BARREL FPCB. (a) Remove the six SCREWs. SCREW-TAPTYPE SCREW-TAPTYPE SCREW-TAPTYPE Fig 3-20 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-11 3-11...
  • Page 25 (b) Remove the CONNECTOR as indicated " Fig. A" below. Remove the FPCB from the connector. Fig. A Fig 3-21 3. Disassembly of BARREL. (a) Remove the ASSY SUB BARREL-LENS BASE and GEAR-IDLE. ASSY SUB BARREL-LENS BASE GEAR-IDLE Fig 3-22 3-12 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 26 Fig 3-23 (c) Turn the triangle indication of BARREL OUTER CAM by counterclockwise direction as arrow of "Fig. A" and then remove the BARREL BASE. counterclockwise direction Fig. A BARREL BASE Fig 3-24 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-13 3-13...
  • Page 27 (e) Moving the pin by as arrow direction of "Fig. A" and then remove the BARREL-OUTER GUIDE. Be especially careful not to damage the pin when remove it. Fig. A BARREL-OUTER GUIDE Fig 3-26 3-14 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 28 "Fig. B". BARREL-INNER GUIDE counterclockwise direction Clockwise direction DECORING CAM Fig. A Fig. B Fig 3-27 (g) Remove the ASSY SUB BARREL CAM. ASSY SUB BARREL CAM Fig 3-28 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-15 3-15...
  • Page 29 (h) Remove the ASSY SUB BARREL-3RD and then remove the ASSY SUB BARREL-2ND LENS. ASSY SUB BARREL-3RD ASSY SUB BARREL-2ND LENS BARREL-INNER GUIDE Fig. 3-29 (i) Turn the DECORING-CAM by counterclockwise direction as arrow and remove it. DECORING-CAM counterclockwise direction Fig. 3-30 3-16 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 30 Disassembly and reassembly Turn the ASSY SUB BARREL-ZOOMRING by counterclockwise direction as arrow and remove it. BARREL-INNER CAM counterclockwise direction ASSY SUB BARREL-ZOOMRING ASSY SUB BARREL-ZOOMRING Fig. 3-31 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-17 3-17...

  • Page 31: Reassembly Of Barrel

    2) Do not get any Grease on the AF lens. 3) Apply a light coating of the Grease KG-513 and make sure not to get any on the AF lens and other components. Apply Grease Apply Grease 3-18 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 32 ■ Apply the HANARL with a clean and good-quality brush, making sure the surface is clean. ■ HANARL is volatile product. Keep its container tightly covered. BARREL-BASE Inside surface thoroughly BARREL-OUTER CAM Inside surface thoroughly Around the outside friction surface Fig. 3-32 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-19 3-19...
  • Page 33 Disassembly and reassembly ASSY SUB BARREL-ZOOMRING Around the outside friction surface BARREL-INNER GUIDE Inside and outside surface thoroughly DECORING-CAM Inside and outside surface thoroughly Around the outside friction surface Fig. 3-33 3-20 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 34 Disassembly and reassembly BARREL-INNER CAM Inside and outside surface thoroughly Fig. 3-34 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-21 3-21...
  • Page 35 ⓑ ⓐ BARREL-INNER GUIDE Fig 3-35 (b) Assemble the ASSY SUB BARREL-3RD and BARREL-INNER GUIDE by aligning the part “a with b” as illustrated. ASSY SUB BARREL-3RD ⓐ ⓑ BARREL-INNER GUIDE Fig 3-36 3-22 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 36 (d) Assemble the BARREL-INNER CAM and ASSY SUB BARREL-ZOOMRING by aligning “a”, "b" and then turn the BARREL-INNER CAM by counterclockwise direction as arrow and assemble it. BARREL-INNER CAM counterclockwise direction ⓐ ⓑ ASSY SUB BARREL-ZOOMRING Fig 3-38 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-23 3-23...
  • Page 37 (e) Converge the protrusion by middle direction as "a" of "Fig.A" and then assemble the DECORING-CAM by aligning the part “b”, "c" as illustrated. ⓐ ⓑ ⓒ Fig. A DECORING-CAM Fig 3-39 (f) Assemble the BARREL-OUTER GUIDE by aligning the part “a", "b”, "c" as illustrated. ⓑ ⓒ ⓐ BARREL-OUTER GUIDE Fig 3-40 3-24 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 38 (g) Assemble the BARREL-OUTER CAM by aligning the part “a", "b” as "Fig. A". State of completing assembly ⓑ ⓐ Fig. A BARREL-OUTER CAM Fig 3-41 (h) Assemble the BARREL-BASE by aligning the part “a”, "b" as illustrated. ⓐ ⓑ BARREL-BASE Fig 3-42 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-25 3-25...
  • Page 39 (i) Assemble the FPCB as "Fig.A" and then make the BARREL by TELE state. Assemble the SHUTTER FPCB GUIDE by aligning the “a”, "b" as illustrated. Be especially careful not to Bend the SHUTTER FPCB GUIDE when Assemble it. BOTTOM Fig. A ⓑ ⓑ ⓐ SHUTTER FPCB GUIDE Fig 3-43 3-26 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 40 Assembled state of pin to top and bottom as "Fig. B" check it. ASSY SUB BARREL-LENS BASE AF CLIP GEAR-IDLE ⓑ ⓐ Fig. A BOTTOM Fig. B Fig 3-44 (k) Tighten the four SCREWs. SCREW-TAPTYPE SCREW-TAPTYPE Fig 3-45 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-27 3-27...
  • Page 41 Disassembly and reassembly (l) Assemble the ZOOM MODULE ASSY by aligning the part “a”, "b" as illustrated. ZOOM MODULE ASSY ⓐ ⓑ Fig 3-46 (m) Tighten the two SCREWs. SCREW-TAPTYPE Fig 3-47 3-28 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 42 (a) Assemble the CUSHION-IR FILTER and CUSHION-IR and PCB FPC-CCD ASSY by order in shown location to "Fig.A" as below and then tighten the three SCREWs. CUSHION-IR CUSHION-IR FILTER Fig. A (a) CUSHION-IR FILTER (b) CUSHION-IR (c) PCB FPC-CCD ASSY (d) SCREW (143025) Fig 3-49 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-29 3-29...

  • Page 43: Pcb Diagrams

    100KOHM WL_PWR_1_8_CNT NR303 C803 J301 2200NF NR304 C703 C805 0.47NF NR305 NR702 C701 4700NF NR307 2200NF NR306 C810 ANTA_TP C705 100NF R408 4700nF 8.2Kohm R407 C403 C407 150KOHM 100NF D805 47nF_50V SCREW1 NR707 NR703 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 44: Top Pcb

    PCB diagrams 4-2 TOP PCB 4-3 CCD FPCB BOTTOM SSCM110300 3409-001827 A8835EEJTR_T 1209-001846 1.91Kohm SKSDPBE010 TTRN_3825H 3404-001349 AD26-00044A 470Kohm 1MOHM 100NF KP_153 AD26-00054A RJP4010AGE 0508-001243 LED1 SY3317_FH 0601-003138 SKRWAEE030 3404-001360 SMDGASKET 6302-001240 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 45: Cap Fpcb

    PCB diagrams 4-4 CAP FPCB BOTTOM Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 46: Block Diagram

    신규- AUO MUX BLOCK IO BLOCK BATT. AUDIO BLOCK (3.0", hVGA) 1_8VCC_TG BP85A 3VCC_TG MONO MONO CHARGER IC + MUIC 5PIN IO Micro USB 3_3VCC_HRGVDD SPEAKER MIC. VDDPWR (MAX14616) (HY07- AB0700) CHARGER 3_3VCC_WIFI AD5055 1_8VCC_WIFI Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 47: Firmware Update

    1. First turn on the power of the camera. Power ON Fig. 6-1 2. Press the WIDE button + DOWN button and then turn the POWER off. DOWN WIDE Power OFF WIDE button + DOWN button Fig. 6-2 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 48 Firmware update 3. Turn the power of the camera on again to check whether it has been reset. Fig. 6-3 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 49: Version Check

    SHUTTER button + DOWN button, and then turn the POWER on. DOWN SHUTTER Power ON SHUTTER button + DOWN button Fig. 6-4 4. Check the version of the firmware and then turn the power off. Fig. 6-5 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 50: Upgrade

    2. Use the AC adaptor or fully charged batteries for the power. * You can proceed with the upgrade only when the battery level is full (Icon showing full up to 3rd level). 3. Turn on the power of the camera. Power ON Fig. 6-6 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 51: Shutter Button

    Fig. 6-7 5. The progress of the firmware upgrade will be displayed on the LCD and the upgrade will proceed. Fig. 6-8 6. When the upgrade is completed, the camera will automatically be turned off. Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 52: Adjustment

    7. Adjustment 7-1 Basic guide for adjustment ■ After replacing an electronic part, you must make changes for each adjustment item in the ST200/ST200F. ■ The following table shows the necessary adjustment item for replacing each part. ■ The camera must be fixed with a tripod and levelled condition must be maintained.
  • Page 53 Display adjusted value and whether Display adjusted value and whether it is OK (LCD) it is OK (LCD) Set process ID (EEPROM) Auto Power Off or continue with process Power Off or stand by Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 54: Lens Shading Adj

    On the memory card, open and check if a CSV file was generated from the adjustment.. <Restriction> If the capacity of CSV file is more than 30KB, clear all of the previous data and then, record Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 55: Shutter Close Time Adj

    On the memory card, open and check if a CSV file was generated from the adjustment. <Restriction> If the capacity of CSV file is more than 30KB, clear all of the previous data and then, record Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 56: Flash Adj

    On the memory card, open and check if a CSV file was generated from the adjustment. <Restriction> If the capacity of CSV file is more than 30KB, clear all of the previous data and then, record Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 57: Punt Adj

    - Maintain distance of less than 1cm between the end of the camera body tube to the lens surface of the Infinity Collimator. - The camera must be fixed while the adjustment is made. Infinity Collimator Camera Tripod Fig. 7-4 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 58 For the adjustment in these environments, AF may not be accurate when shooting Tele or macro. 3. Turn on the power of the camera. 4. The adjustment will automatically start. <Adjustment result> On the memory card, open and check if a CSV file was generated from the adjustment. Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 59: Vertical Line Adj

    On the memory card, open and check if a CSV file was generated from the adjustment. <Restriction> If the capacity of CSV file is more than 30KB, clear all of the previous data and then, record Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 60: Ccd Defect Adj

    Put your camera, face up, on a steady surface such as a table or anything solid that won’t move. Don’t put your camera on a highly unstable surface. Also don’t put your camera down or hold it. The noise may significantly affect degrading the Gyro Sensor and Hall Sensor performance. Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 61: Serial Number Writing Process

    5) When the adjustment is completed, the camera will automatically be turned off. <Process result> When checking the version (Press SHUTTER button and DOWN button to turn on), S/N appears on the screen. S/N: 123456789123 Fig. 7-9 7-10 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 62: Exploded View And Parts List

    8. Exploded view and parts list 8-1 BODY ASSEMBLY Item Service Info Service is available. Service is not available. 1-12 1-10 1-11 1-17 1-16 1-23 1-18 1-13 1-19 1-14 1-22 1-15 1-20 1-24 1-21 TOP PCB ASSEMBLY Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 63 AF LED 1-16 AD63-05453A CUSHION MIC 1-17 3003-001183 1-18 AD63-06897A CUSHION-MIC SEALING 1-19 3001-002641 SPEAKER 1-20 AD61-05580A HOLDER CONDENSOR 1-21 2401-004886 CONDENSOR 1-22 AD63-05406A T/SHEET-CONDENSOR 1-23 AD41-01587A TOP FPCB 1-24 AD41-01850A FPC-ST200 CAP FPCB Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.

  • Page 64: Chamber Assembly

    ASSY COVER BATTERY_BK BLACK AD97-22035B ASSY COVER BATTERY_SL SILVER AD97-22035C ASSY COVER BATTERY_PP PLUM AD97-22035D ASSY COVER BATTERY_RD 6107-002238 SPRING TS(BATTERY COVER) AD61-05131A SHAFT COVER BATTERY AD61-05388A SPRING CS (BATTERYY PUSH) AD61-05583A PLATE BATTERY HOLDER Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.

  • Page 65: Front Cover Assembly

    Exploded view and parts list 8-3 FRONT COVER ASSEMBLY 3-10 TOP SUB ASSEMBLY 3-12 3-11 3-13 3-14 3-15 3-16 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 66 AD97-22041B ASSY COVER FRONT_ST200F_SL SILVER AD97-22041C ASSY COVER FRONT_ST200F_PP PLUM AD97-22041D ASSY COVER FRONT_ST200F_RD 3-16 AD97-22285A ASSY COVER FRONT_ST200_BK BLACK AD97-22285B ASSY COVER FRONT_ST200_SL SILVER AD97-22285C ASSY COVER FRONT_ST200_PP PLUM AD97-22285D ASSY COVER FRONT_ST200_RD Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.

  • Page 67: Back Cover Assembly

    AD63-06678B COVER SOCKET_SL SILVER AD63-06678C COVER SOCKET_PP PLUM AD63-06678D COVER SOCKET_RD AD64-03606A WINDOW LED REAR AD97-22040A ASSY COVER BACK_BK BLACK AD97-22040B ASSY COVER BACK_SL SILVER AD97-22040C ASSY COVER BACK_PP PLUM AD97-22040D ASSY COVER BACK_RD Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.

  • Page 68: Barrel Assembly

    5-27 5-52 5-15 5-14 5-64 5-13 5-51 5-26 5-12 5-50 5-49 5-11 5-25 5-46 5-48 5-45 5-10 5-47 5-67 5-44 5-24 5-43 5-68 5-23 5-42 5-41 5-66 5-40 5-22 5-21 5-39 5-20 5-19 5-69 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 69 AD67-01950A BARREL-ZOOM-PL210 5-18 AD66-00848A SHAFT_MOVE_PIN_ZOOM-PL210 AD64-03082B DECORING-OUT CAM_BK BLACK AD64-03082A DECORING-OUT CAM_SL SILVER 5-19 AD64-03615A DECORING-OUT CAM_PL PLUM AD64-03621A DECORING-OUT CAM_RD 5-20 AD63-06889A SHEILD OUT CAM 5-21 AD67-01946A BARREL-OUTER CAM-PL210 5-22 AD67-01945A BARREL-OUTER GUIDE-PL210 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 70 5-49 AD66-00637A AF GEAR A 5-50 AD66-00638A AF GEAR B 5-51 AD61-04905A BASE-LENS-PL210 5-52 AD97-20077A MOTOR ASSY-AF 5-53 6003-001630 SCREW (143525) 5-54 6003-001288 SCREW (142025) 5-55 AD92-01398A FPCB-BARREL MAIN 5-56 AD63-04360A CUSHION IR FILTER Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 71 ASSY SUB BARREL-BARRIER_BK BLACK AD97-21975A ASSY SUB BARREL-BARRIER_SL SILVER 5-68 AD97-21977A ASSY SUB BARREL-BARRIER_PL PLUM AD97-21976A ASSY SUB BARREL-BARRIER_RD AD97-21756A ASSY BARREL_BK BLACK AD97-21963A ASSY BARREL_SL SILVER 5-69 AD97-21965A ASSY BARREL_PL PLUM AD97-21964A ASSY BARREL_RD 8-10 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.

  • Page 72: Packing Items

    Q ty Available Remark AD43-00199A BP85A_BATTERY AD39-00190A USB CABLE AD39-00191A AV_CABLE-MICRO USB AD44-00178A AC ADAPTOR_5055_KOR AD44-00184A AD5055_CHI AD44-00183A AD5055_EXP AD44-00179A AD5055_USA AD44-00182A AD5055_UK AD44-00185A AD5055_AUS AD44-00181A AD5055_ARG AD44-00180A AD5055_BRA AD63-02604A STRAP_KENOX_S860_BLACK AD63-02596A STRAP_KENOX_S730_SILVER 8-11 8-11 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 73 E.Asia, W.Asia, China, Japan https://gspn2.samsungcsportal.com N.America, S.America https://gspn3.samsungcsportal.com © 2011 SAMSUNG Electronics Co.,Ltd This Service Manual is a property of Samsung Electronics Co.,Ltd. All rights reserved. Any unauthorized use of Manual can be punished under Printed in Korea applicable International and/or domestic law.

This manual is also suitable for:

St200

Table of Contents