Table of Contents
Advertisement
6. Help
Link light on the parent unit does not come on
• Check whether the parent unit is powered on.
Link light on the parent unit flashes
• The parent unit and the baby unit may be out of range with each other.
Reduce the distance between the units, but not closer than 1.5 metre.
• The baby unit may be switched off. Press and hold the
unit to switch on the baby unit.
The parent unit beeps
• Lost connection with the baby unit. Reduce the distance between the parent
unit and the baby unit, but not closer than 1.5 metre.
• The baby unit may be switched off. Press and hold the
unit to switch on the baby unit.
Cannot hear sound or baby cry from the parent unit
• The volume level in the parent unit may be set too low, increase the volume
level of the parent unit. Refer to section 3.3 for volume level settings.
• The parent unit and the baby unit may be out of range with each other.
Reduce the distance between the units, but not closer than 1.5 metre.
The baby monitor system produces a high-pitched noise
• The parent unit and the baby unit are too close to each other. Make sure the
parent unit and baby unit are at least 1.5 metre away from each other.
• The speaker volume of the parent unit maybe set too high. Decrease the
volume of the parent unit.
Help
0
key on the baby
0
key on the baby
11
Advertisement
Table of Contents
