Corner Wall - Epson EB-L1750U User Manual

Adjusting Projected Images

Corner Wall

This allows you to correct distortion that occurs when projecting on a
surface with right angles, such as a square pillar or the corner of a room,
and adjust the amount of expansion and contraction.
Face the projector directly opposing the screen with the lens position
moved to the home position.
"Adjusting the Position of the Projected Image (Lens Shift)"
s
a
• Project onto a surface with a right angle.
• If a large amount of adjustment is performed, the focus may not be
uniform even after making adjustments.
• If 4K Enhancement is enabled, a message is displayed. Select Yes to
disable 4K Enhancement. (EB-L1755U/EB-L1750U/EB-L1505UH/EB-
L1500UH/EB-L1495U/EB-L1490U only)
s Image - Image Enhancement - 4K Enhancement
• This is not available for ELPLX02/ELPLX02W.
Use the following to check the adjustment range for the image.
"Corner Wall" p.269
s
a
Press the [Menu] button while projecting.
b
Select Geometry Correction from Settings.
c
Select Corner Wall, and then press the [
p.34
p.145
d
] button.
e
"If this setting is changed, the image may be distorted." is displayed,
press the [ ] button again.
Select Corner Wall, and then press the [
Select Corner Type, and then press the [
73
] button.
] button.