Epson EB-L1750U User Manual page 116

Memory Function
Function
Load Memory
Save Memory
Erase Memory
Rename Memory
Explanation
Loads the saved memory. When you select a
memory and press the [ ] button, the settings
applied to the current image are replaced with the
settings from the memory.
Registers current settings in the memory. When
you select a memory name and press the [
button, the settings are saved.
Erases the registered memory. When you select a
memory name and press the [ ] button, a
message is displayed. Select Yes, and then press the
[ ] button to erase the selected memory.
Changes the memory name. Select the memory
name you want to change, and then press the [
button. Enter the memory name using the soft
keyboard.
s "Soft keyboard operations" p.158
When you have finished, move the cursor over
Finish, and then press the [ ] button.
Function
Reset Memory
a
If the mark on the left of the memory name is turned blue, it
means the memory has already been registered. When you
select a registered memory, a message is displayed asking you to
confirm that you want to overwrite the memory. If you select
Yes, the previous settings are deleted and the current settings
are registered.
]
]
Explanation
Resets the name and settings of a saved memory.
To reset all memories saved in Memory, Lens
Position, and Geometry Correction, use Reset All
Memories.
s Reset - Reset All Memories p.168
116