Epson EB-L1750U User Manual page 131

Wireless Network Projection
d
Select Network Configuration and press [Enter].
e
Select the Basic menu and press [Enter].
f
Select the basic options as necessary.
• Projector Name: Enter the projector name used to identify the
projector over a network. You can enter up to 16 single-byte
alphanumeric characters.
• PJLink Password: Lets you set a password for using the PJLink
protocol for projector control. You can enter up to 32 single-byte
alphanumeric characters.
• Remote Password: Lets you set a password for accessing the
projector using Remote in Epson Web Control. You can enter up
to 8 single-byte alphanumeric characters. (The user name is
EPSONREMOTE; the default password is guest.)
• Web Control Password: Lets you set a password for accessing the
projector using Web Control in Epson Web Control. You can enter
up to 8 single-byte alphanumeric characters. (The user name is
EPSONWEB and the default password is admin.)
• Moderator Password: Lets you set an authentication password
when connecting to the projector as a moderator using Epson
iProjection. Enter four digits for the password. (There is no default
password.)
• Projector Keyword: Lets you turn on a security password to
prevent access to the projector by anyone not in the room with it.
Turn on "Projector Keyword" when using thumbnail display or the
send function between the projector and connected devices.
• Display Keyword: Lets you display a projector keyword on the
projection screen when connecting to the projector using Epson
iProjection.
• Display LAN Info. lets you set the display format for the
projector's network information.
a
Use the displayed keyboard to enter the name and password.
Press [ ][ ][ ][ ] buttons on the remote control to
highlight characters and press [Enter] to select them.
g
Select the Wireless LAN menu and press [Enter].
131