Honda UMK425T Owner's Manual page 57

4.Nylon-line replacement
• Never replace the nylon-line with a line of a different material, such
as steel wire.
• To avoid severe personal injury, make sure that the engine switch is
in the OFF position to prevent accidental starting.
CAUTION:
• Stop the engine and make sure that the head is stopped before you
do any service on the nylon-line.
• Wear heavy gloves to protect your hands when replacing the nylon-line.
1.Stop the engine with the engine switch to the OFF position.
2.Put off the cover from housing. Pressing two latches of the housing,
pull down the cover.
3.Put off spool from the cover and remove the rest of the nylon-line.
54
LATCH
Press
Put off
COVER
HOUSING
LATCH
Press
COVER
SPOOL