Trimming Operation - Honda UMK425T Owner's Manual

7. TRIMMING OPERATION

Read and understand the safety instructions on pages 3 to 13 before
operating the grass/weed trimmer.
If you notice any abnormal sound, smell, vibration, or other unusual
signs, stop the engine immediately and consult your authorized Honda
dealer.
Grass/weed trimmer holding position adjustment:
Stop the engine and adjust the length of the shoulder harness.
1.Adjust the shoulder harness so that the hanger is positioned at your
right hip (see page 27).
2.Hang the trimmer on the shoulder harness hook by its hanger.
3.Keep the trimmer so that the cutting attachment is parallel to the
ground by holding the handle with your both hands.
4.Adjust the shoulder harness length so that the cutting attachment is
parallel to the ground and stays above the ground keeping the
clearance specified below.
HANGER
HIP PAD
Do not operate the grass/weed trimmer if the wheeling cutting
attachment could reach your feet. Your feet can get injured if the
wheeling cutting attachment touches your feet.
40
SHOULDER HARNESS
HANDLE
CUTTING
ATTACHMENT
Parallel to the ground and about 10 cm
above the ground.
GROUND
HOOK
HANGER