Arctic Cat Y-12 2008 Manual page 47

FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
11. Install the stator in the right-side crankcase
cover; then install the two cap screws (coated
with red Loctite #271). Tighten to specifica-
tions.
12. Install the formed grommet into the cover slot;
then place the source coil into position on the
mounting towers. Secure with two cap screws
tightened to specifications.
www.mymowerparts.com
Back
3-24
DSC02234
DSC02240A
DSC02237
Back to TOC
13. Press the flywheel key into the crankshaft key-
way and install the flywheel on the crankshaft.
Install the washer and flange nut; then tighten to
specifications.
14. Install the cooling fan with four cap screws; then
tighten to specifications.
Back to Section TOC
DSC02240B
DSC02241
DSC02243
DSC02246
Next