Arctic Cat Y-12 2008 Manual page 111

FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
3. Connect the handlebar switch assembly wiring
connector.
Hand Brake Lever
Assemblies
! WARNING
After removing and installing of components that are
brake-related, ALWAYS check and adjust brakes as
necessary before operating the ATV.
REMOVING
1. Remove the right handlebar grip (see Section 8).
2. Remove the cover from the throttle control
housing exposing the throttle cable; then remove
the cable.
www.mymowerparts.com
Back
MD2438
MD2434
Back to TOC
3. Remove the front brake cables from their adjust-
ers by screwing the adjusters inward to loosen
the cables; then pulling them free.
4. Loosen the 6 mm Allen-head screw securing
the front brake lever assembly and slide the
assembly off the handlebar.
Back to Section TOC
MD2440
MD2439
9
MD2449
Next
9-3