Advertisement
Create crimps
1 Press the lever ( ) to open the attachment and place a section of
hair between the crimping plates. Start crimping at the roots.
2 Release the lever and keep the plates together for 5 to 10 seconds.
3 Press the lever to open the attachment and place a lower area of
the same section of hair between the plates. Make sure there is an
overlap.
4 Repeat this process until you have reached the hair tip.
5 To style the rest of your hair, repeat steps 1 to 4.
Create straight sleek style and flicks
1 Press the lever ( ) to open the attachment and place a section of
hair between the straightening plates.
2 Slide the styler down the length of the hair in a single motion (max.
5 seconds) from root to end, without stopping to prevent overheating.
•
To create the desired type of flick, turn the styler half-circle
inwards (or outwards) when it reaches the last 3-5 cm of the hair
tip. Hold the styler in that position for 2 to 3 seconds, and then
release it.
3 After 20 seconds, repeat step 2 until you achieve the desired look.
4 To style the rest of your hair, repeat steps 1 to 3.
After use:
1 Switch off the appliance and unplug it.
2 Place it on a heat-resistant surface until it cools down.
3 Remove hairs and dust from the appliance and attachments.
4 Clean the appliance, straightening plates, and curling tongs by damp
cloth.
5 Keep the appliance in a safe and dry place, free of dust. You can also
store the appliance in the supplied storage pouch.
Advertisement
