Page 1
INSTRUCTION MANUAL High Speed Drill MDP200 MDP201 002855 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH SPECIFICATIONS Model MDP200 MDP201 Steel 6.5 mm Capacities Wood 9 mm No load speed (min 4,500 0 - 4,500 Overall length 202 mm 206 mm Net weight 0.9 kg Safety class • Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
10. Use safety equipment. Always wear eye are less likely to bind and are easier to control. protection. Safety equipment such as dust mask, 22. Use the power tool, accessories and tool bits non-skid safety shoes, hard hat, or hearing etc.
Before plugging in the tool, always check to see • the switch trigger actuates properly and returns to the "OFF" position when released. For Model MDP200 002856 To start the tool, simply pull the switch trigger. Release the switch trigger to stop. For continuous operation, pull the switch trigger and then push in the lock button.
Always be sure that the tool is switched off and • unplugged before carrying out any work on the tool. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
Page 8
Makita Corporation Anjo, Aichi, Japan 884735-9...