Panasonic HC-WXF1 Operating Instructions Manual page 97

Night Mode
(For the WXF1 series/
You can record images even in very low light situations (minimum required illumination:
approx. 0.5 lx) or in the dark.
Each time the icon is selected, the indication changes by one setting in the following order:
([COLOUR]) #
≥ When [ (Night Mode)] is to be set in an Fn button with the [FN BUTTON SETTING], the
setting changes each time you press the Fn button.
([COLOUR]): Allows you to record colour images in very low light situations.
([Infrared]):
OFF:
≥ When [REC MODE] is set to [24p],
WXF1
≥ (For the series)
When a sub window is being displayed during recording with the Twin Camera function,
([Infrared]) is not displayed.
∫ To set ON/OFF of the infrared light for
: [RECORD SETUP] # [INFRARED LIGHT] # [ON] or [OFF]
MENU
≥ When is displayed after you set the item to [ON], you can record images in the dark.
≥ When you are in a dim place or in other situations where it is difficult to focus with Auto Focus, set
the item to [OFF].
≥ If you turn off and on this unit and select
(For the VX1 series/
This function allows you to record colour images in very low light situations. (Minimum
required illumination: approx. 0.5 lx)
It will switch every time the icon is touched.
([COLOUR]) # [OFF]
≥ Using a tripod is recommended.
≥ In darker areas, Auto Focus may focus a bit slower. This is normal.
WXF1
≥ (For the series/
The Night Mode setting cannot be changed while Slow Zoom is working.
Night Mode ([COLOUR])
≥ Recorded scene is seen as if frames were missed.
≥ If set in a bright place, the screen may become washed out for a while.
≥ Bright dots that are usually invisible may be seen, but this is not a malfunction.
VXF1 series)
([Infrared]) # [OFF]
Allows you to record images in the dark.
Cancel the setting.
([COLOUR]) is not displayed.
V800 series)
VXF1
series)
([Infrared])
([Infrared]), [INFRARED LIGHT] will be set to [ON].
- 97 -
(l 75)