Panasonic HC-WXF1 Operating Instructions Manual page 46

[ALERT SOUND]
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this
sound.
When [OFF] is selected, the sound is not output at the start/end of recording, etc.
: [SETUP] # [ALERT SOUND] # desired setting
MENU
(Volume low)/
2 Beeps for 4 times
When an error occurs, follow the instructions displayed on the screen.
≥ Refer to page 114
[REC/PAUSE ALERT]
When this is set to [ON], the REC icon/PAUSE icon
paused.
: [SETUP] # [REC/PAUSE ALERT] # [ON]
MENU
[SELECT OPERATION ICONS]
You can change the operation icons
Register 3 favourite operation icons.
≥ The default settings are as follows:
WXF1 series/
VXF1
series
VX1
series/
V800 series
1 Select the menu.
: [SETUP] # [SELECT OPERATION ICONS]
MENU
2 Touch the operation icon you would like to change to cancel the setting.
3 Touch the operation icon to be set.
≥ Name of the function is displayed by touching and holding on the operation icon.
≥ To cancel, touch the operation icon again.
4 Touch [ENTER].
(Volume high)/[OFF]
when changing the shutter sound setting.
(l 94) to display in the Touch Menu.
Motion Picture Recording Mode
(PRE-REC)
(Night Mode)
(Level Shot Function)
(Fade)
(PRE-REC)
(Level Shot Function)
(l 33) is displayed when recording is started or
Still Picture Recording Mode
- 46 -
(l 265)
(Self-timer)
(Intelligent Exposure)
(Backlight Compensation)