Panasonic HC-WXF1 Operating Instructions Manual page 50

[MEDIA STATUS]
The used space and remaining recordable time of the SD card and built-in memory can be checked.
: [SETUP] # [MEDIA STATUS]
MENU
WXF1M
≥ (For the )
Touching [CHANGE MEDIA] switches the unit between the display for the SD card and the
display for the built-in memory.
≥ The remaining recordable time in the currently set Recording Mode is displayed only in the
Motion Picture Recording Mode.
≥ Any remaining recordable time exceeding 99 hours and 59 minutes will be displayed as
"99h59m+".
≥ Touch [EXIT] to close the indication.
≥ The SD card or built-in memory requires some space to store information and manage system
files, so the actual usable space is slightly less than the indicated value. The usable SD card/built-
in memory space is generally calculated as 1 GB=1,000,000,000 bytes. The capacities of this
unit, PCs and software are expressed as 1 GB=1,024k1,024k1,024=1,073,741,824 bytes.
Therefore, the indicated value of the capacity appears to be smaller.
[Version Disp.]
The model number and the firmware version of the unit are displayed.
: [SETUP] # [Version Disp.]
MENU
[Version Up]
You can update the firmware version of this unit.
: [SETUP] # [Version Up]
MENU
For the latest update information, check the support website below. (As of January 2018)
http://panasonic.jp/support/global/cs/e_cam
(This Site is English only)
[Eye-Fi TRANSFER]
This item is displayed only when an Eye-Fi card is inserted.
Please refer to page 177.
[Eye-Fi DIRECT]
This item is displayed only when an Eye-Fi card is inserted.
Please refer to page 178.
- 50 -