Recording Still Pictures - Panasonic HC-WXF1 Operating Instructions Manual

Basic

Recording still pictures

1
Open the LCD monitor or extend the
viewfinder to switch to Still Picture
Recording Mode. (
2
Press the
Auto Focus only)
Focus indication:


3
Press the
≥ If you set the Optical Image Stabilizer function
Stabilizer function will be more effective. (
displayed when the
≥ Using a tripod is recommended when recording still pictures in dark places because the shutter
speed becomes slow.
≥ You can also take a picture just by touching the subject to focus. (Touch Shutter:
≥ The focus indication and the focus area may not be displayed depending on the recording
conditions or the menu settings.
∫ To set the desired Fn button as the Photoshot button
( series/
WXF1
You can also change the [FN BUTTON SETTING] so you can use the desired Fn button as a
Photoshot button. (l
: [SETUP] # [FN BUTTON SETTING] # [Fn1] to [Fn4] # [
MENU
≥ The function where Auto Focus works when the Photoshot button is pressed halfway in step 2 is
enabled when [
22)
l
button halfway. (For
button fully.
button is pressed halfway.)
series)
VXF1
115)
] is set in the [Fn3] (Fn3 button).
A Focus indication:
± (The white lamp flashes.): Focusing
¥ (The green lamp lights up.): When in focus
No mark: When focusing is unsuccessful.
B Focus area (area inside brackets)
(l 91) to
MEGA (MEGA Optical Image Stabilizer) will be
- 35 -
([MODE1]), then the Image
93)
l
]