Panasonic HC-WXF1 Operating Instructions Manual page 112

≥ When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom rate.
(audio input level meter) is displayed on the screen when [5.1ch/2ch] is set to [5.1ch], and
≥
(audio input level meter) is displayed when [5.1ch/2ch] is set to [2ch] and [AUDIO
LEVEL]/[MIC LEVEL] is set to a setting other than [AUTO].
≥ You cannot record with the audio completely muted.
[PICTURE ADJUST]
Adjust the quality of the image while recording.
Adjust by outputting to a TV while adjusting the quality of the image.
≥ This setting is retained when you change between Motion Picture Recording Mode and
Still Picture Recording Mode.
≥ Switch to Manual Mode.
1 Select the menu.
: [RECORD SETUP] # [PICTURE ADJUST]
MENU
2 Touch the desired setting items.
[SHARPNESS]:
[COLOUR]:
[EXPOSURE]:
[WB ADJUST]:
3 Touch /
4 Touch [ENTER].
≥ Touch [EXIT] to complete the settings.
appears on the screen.
≥
series/
WXF1 VXF1
[FOCUS RING SETTING]
Set the amount that focus moves when you rotate the Manual ring to adjust the focus.
: [RECORD SETUP] # [FOCUS RING SETTING] # desired setting
MENU
[SPEED]:
[COARSE]:
[FINE]:
(l 81)
Sharpness of the edge
Depth of the colour of the image
Brightness of the image
Picture colour balance
to adjust settings.
series
The focus value changes according to the speed that the Manual ring is
rotated.
The focus value changes according to the rotational position of the
Manual ring. The amount that focus moves when you rotate the Manual
ring is large, so this is suited to rough adjustments.
The focus value changes according to the rotational position of the
Manual ring. The amount that focus moves when you rotate the Manual
ring is small, so this is suited to fine adjustments.
- 112 -