Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Vacmaster VDK1138SWC-110
Summary of Contents for Vacmaster VDK1138SWC-110
- Page 1 1100W 110V 38L VDK1138SWC-110 ORIGINAL INSTRUCTIONS...
-
Page 6: Table Of Contents
Troubleshooting ..........................16 Technical Data ..........................17 Recycling and Disposal ........................17 ® Thank you for purchasing this Vacmaster wet and dry vacuum cleaner. Feel confident that with ® Vacmaster you are obtaining a high quality product engineered for optimal performance. This vacuum cleaner is suitable for use with both liquids and dry materials. -
Page 7: Safety Information
SAFETY INFORMATION READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. This machine is intended for commercial use, for example in hotels, schools, hospitals, factories, shops, offices and rental businesses. Any other use is considered as improper use. The manufacturer accepts no liability for any damage resulting from improper use. - Page 8 • Clear the working area of any items or possessions that you do not wish to be vacuumed before operation. • Keep cord away from heated surfaces. • Do not expose to rain. Store indoors. • Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
- Page 9 examine it for signs of damage. • Precautions should be taken when changing attachments. • For user servicing, the machine must be dismantled, cleaned and serviced, as far as is reasonably practicable, without causing risk to the maintenance staff and others. Suitable precautions include decontamination before dismantling, provision for local filtered exhaust ventilation where the machine is dismantled, cleaning of the maintenance area and...
-
Page 10: Unpacking And Checking Carton Contents
WARNING: When carrying out service or repair operations, all contaminated items which cannot be satisfactorily cleaned are to be disposed of; such items shall be disposed of in impervious bags in accordance with any current regulation for the disposal of such waste. -
Page 11: Assembly
ASSEMBLY NOTE: A Phillips screwdriver is required. 1. Remove all the contents from inside of the vacuum cleaner container. 2. Attach the carry handle into the slots located on the top of the power head. Secure them with supplied screws (Fig. 1). 3. -
Page 12: Operation
holder. Pry the attachment up from underneath (Fig. 10 & 11). 3) Insert the new attachments into the holder applying downwards pressure (Fig. 11). 4) The attachments can be used in three combinations (Fig. 12): Brush and Squeegee Combination: For use with mixture of wet or dry liquids. Dual Brush Combination: For use with dry materials or carpeted floor surfaces. - Page 13 1) Position the end of the suction hose nozzle into the channel located within the filter cleaner button. 2) Move the on/off switch to the “I” position. 3) Press the filter cleaning button down and hold it down for 3-4 seconds (Fig. 15). 4) Repeat the process two more times.
- Page 14 Depending on how hazardous the dust is, the cleaner must be fitted with appropriate filters and collection means. Cartridge Filter + Dusts with OEL Cartridge Filter Order Disposable Bag values ≥0.1 mg/ No.: 951557 (observe any Disposable Bag Order Cartridge Filter + additional national No.: 951558 Dust Bag...
-
Page 15: Maintenance
MAINTENANCE WARNING: REMOVE THE POWER CORD FROM THE POWER SUPPLY BEFORE CARRYING OUT ANY MAINTENANCE. WARNING: ALWAYS USE A P2-RESPIRATOR WHEN REMOVING THE CARTRIDGE FILTER AFTER VACUUMING HAZARDOUS DUSTS. 1) Keep all safety devices, air vents and the motor housing free of dirt and dust. Use a soft, dry brush to clean the equipment regularly. -
Page 16: Troubleshooting
TROUBLESHOOTING. Cleaning Performance Vacmaster vacuum cleaners are tested for endurance. If your motor is operating, then the most likely cause for a loss in suction is a blockage or an opening in the vacuum. To maintain a high cleaning performance from your machine, it is important to replace or clean cartridge filters as necessary. -
Page 17: Technical Data
TECHNICAL DATA Model Number VDK1138SWC-110 Motor 110V~ 50Hz Power Input 1100W Max. Power Consumption Of the Power Tool 660W Take-Off Socket Outlet Tank Volume Net Weight 14.0kg Max. Vacuum Pressure 22kPa / 220hPa Max. Flow Rate 68L/s / 244.8m³/h Bearing Capacity of Disposable Bag 11.0kg... - Page 21 ② ①...
- Page 24 VDK1138SWC-110 Suzhou Cleva Electric Appliance Co., Ltd. No.8 Ting Rong Street Suzhou Industrial Park, Suzhou Jiangsu Province, China www.cleva-europe.com Made in P.R.C...