Hardware Monitor Setup; Auto-Detect Hard Disks - Boser HS-2605 Manual

4.10 Hardware Monitor Setup

AMIBIOS SETUP – HARDWARE MONITOR SETUP
(C)2001 American Megatrends, Inc. All Rights Reserved
*** System Hardware Monitor ***
TSENS1 Temperature
CPU Fan Speed
Vcore
+ 2.500V
+ 3.300V
+ 5.000V

4.11 Auto-Detect Hard Disks

This option detects the parameters of an IDE hard disk drive, and
automatically enters them into the Standard CMOS Setup screen.
Up to four IDE drives can be detected, with parameters for each
appearing in sequence inside a box. To accept the displayed entries,
press the "Y" key; to skip to the next drive, press the "N" key. If you
accept the values, the parameters will appear listed beside the drive
letter on the screen.
AMIBIOS HIFLEX SETUP UTILITY – VERSION x.xx
(C)2001 American Megatrends, Inc. All Rights Reserved
Change Supervisor Password
Auto Configuration with Optimal Settings
Auto Configuration with Fail Safe Settings
Auto-detect all hard disk parameters
ESC: Exit
40
Standard CMOS Setup
Advanced CMOS Setup
Advanced Chipset Setup
Power Management Setup
PCI / Plug and Play Setup
Peripheral Setup
Hardware Monitor Setup
Auto-Detect Hard Disks
Change User Password
Save Settings and Exit
Exit Without Saving
: Sel F2/F3: Color F10: Save & Exit
Available Options:
Disabled
Enabled
Reset
ESC: Exit : Sel
PgUp/PgDn: Modify
F2/F3: Color