Unpacking; Opening The Delivery Package; Inspection - Boser HS-2605 Manual

2.1

Opening the Delivery Package

The HS-2605 is packed in an anti-static bag. The board has
components that are easily damaged by static electricity. Do not
remove the anti-static wrapping until proper precautions have been
taken. Safety Instructions in front of this manual describe anti-static
precautions and procedures.
2.2

Inspection

After unpacking the board, place it on a raised surface and carefully
inspect the board for any damage that might have occurred during
shipment. Ground the board and exercise extreme care to prevent
damage to the board from static electricity.
Integrated circuits will sometimes come out of their sockets during
shipment. Examine all integrated circuits, particularly the BIOS,
processor, memory modules, ROM-Disk, and keyboard controller chip
to ensure that they are firmly seated. The HS-2605 delivery package
contains the following items:
HS-2605 Board x 1
Utility CD Disk x 1
IDE flat cable x 1
FDD flat cable x 1
Printer cable x 1
One PS/2 KB/MS Transfer cable x 1
One RS-232 COM Port cable x 4
8-pin USB split type cable x 1
MIC/Audio IN 8-pin cable x 1
2-pin Power cable x 1
Jumper Bag x 1
User's Manual
Chapter 2

Unpacking

5