Complete The Installation - Kohler K-T14420 Installation Manual

Install the Faceplate and Handle (cont.)
Secure the handle stem to the stem extension with the setscrew.
Check the handle alignment. The handle lever should point
straight down.
To adjust the handle position, remove the handle and reposition
the stem. Reinstall the handle and check the alignment. Repeat
until the proper alignment is achieved.
For further adjustment, remove the handle screw and rotate the
handle in the stem extension. Reinstall the handle screw.

6. Complete the Installation

Turn the valve fully counterclockwise to the off position.
Remove the aerator assembly from the spout by turning it
counterclockwise.
Turn on the main water supply.
Turn the valve to the center and run water for approximately one
minute to flush the system.
Check all connections for leaks.
Reinstall the aerator.
Kohler Co. 9 1031692-2-C