Table of Contents
Advertisement
EVGA SR-3 DARK (160-CX-W999)
M.2 SSD, PCIe SSD, and NVMe SSD
Installation steps
M.2 is a very fast card bus that can use multiple connecter types to connect many types of
devices, such as WiFi or SSDs, in a very small and power efficient package. M.2 devices
can be connected via an M.2 card slot or through PCIe by using an M.2 to PCIe adapter.
There are also PCIe native drives of this nature, such as the Intel
Non-Volatile Memory Express, and is a high-performance standard for M.2/PCIe SSDs.
Some NVMe drives require device drivers during the Operating System installation to be
recognized as a boot drive for M.2 and PCIe varieties.
M.2/PCIe share resources with other components on the motherboard, which may limit
some hardware combinations.
DETAILED BREAKDOWN OF SHARED RESOURCES.
M.2 Physical Installation
1. Please see Page 37 for M.2 physical installation instructions.
PCIe Physical Installation
1. Install the SSD into any available PCIe slot with at least x4 Lanes available (Gen3
Lanes are preferred for better speed, but Gen2 Lanes will still outperform the top
end of SATA SSDs).
a. Please refer to Page 28 under PCIe Lane Breakdown for lane specifics,
as the PCIe slot must be at least x4 electrically.
2. Attach the SSD's mounting bracket to the back of the case.
3. Native PCIe drives will not normally require a separate power or data cable
attached; all power and data transfers are done through the PCIe slot.
BIOS Setup and Windows Installation for M.2 and PCIe NVMe
SSDs
1. Remember, NVMe is a new standard and older operating systems do not have
native support. Many NVMe drives require certain steps to make the drive
bootable, even with current operating systems.
PLEASE FULLY READ THE INSTRUCTIONS THAT COME WITH
YOUR M.2 or PCIe NVMe SSD BEFORE INSTALLATION.
2. After reviewing your SSD's instructions and its respective Physical installation
instructions above, power on the PC and enter the BIOS/UEFI by pressing the
Delete key repeatedly.
3. Once in BIOS/UEFI, navigate to the "BOOT" section. Then go down to the
"CSM Configuration" heading and press enter, or click on it with your mouse.
PLEASE SEE CHART ON PAGE 29 FOR A
750. NVMe stands for
®
- 55 -
Advertisement
Table of Contents
