EVGA SR-3 DARK Installation Instructions Manual page 44

Table of Contents

Advertisement

EVGA SR-3 DARK (160-CX-W999)
24pin ATX Power (ATX_PWR_24P)
is the main power supply connector located along the lower-
ATX_PWR_24p
right edge of the board. Make sure that the power supply cable and pins are
properly aligned with the connector on the motherboard. Firmly plug the
power supply cable into the connector and make sure it is secure.
The 24-pin Power Connector may be standard or right-angled depending on
your motherboard model. The SR-3 DARK motherboard uses a right-angle
24pin ATX connector.
6-pin PCIe
The 6-pin PCIe connector present on the motherboard provides additional
power to the PCIe slots, rather than pulling it all from the 24-pin main
power. It is advised to plug in this connector when using SLI, especially with
higher-end graphic cards. It is strongly recommended to plug in this connector
for 3-way and 4-way SLI, regardless of GPU.
- 44 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

160-cx-w999

Table of Contents