Parts Not In The Kit; Intentions Of The Kit - EVGA SR-3 DARK Installation Instructions Manual

EVGA SR-3 DARK (160-CX-W999)

Parts NOT in the Kit

This kit contains all the hardware necessary to install and connect your new
EVGA SR-3 DARK Motherboard. However, it does NOT contain the
following items, which must be purchased separately in order to make the
system fully functional and install an Operating System:
Intel Socket 3647 Processor
®
❑
DDR4 System Memory
❑
CPU Cooling Device and Mounting Kit
❑
PCI-Express Graphics Card
❑
Power Supply
❑
Hard Drive or SSD
❑
Keyboard / Mouse
❑
Monitor
❑
(Optional) Optical Drive
❑
(Optional) Custom watercooling hardware/liquid to actively use the
❑
PCH/VRM waterblock
o The PCH/VRM area will be sufficiently cooled in a passive
configuration (i.e. in stock configuration). A custom watercooling kit is
not required for regular operating conditions. If a custom watercooling
kit is installed, either port may be used as an inlet or outlet. A 6mm
Allen Key (not included) is required to remove the stop fittings.
EVGA assumes you have purchased all the necessary parts needed to allow for
proper system functionality. For a full list of supported CPUs on this
motherboard, please visit

Intentions of the Kit

When replacing a different model motherboard in a PC case, you may need to
reinstall your operating system, even though the current HDD/SSD may
already have one installed. Keep in mind, however, you may sometimes also
need to reinstall your OS after a RMA even if your motherboard remains the
same due to issues that occurred prior to replacing the motherboard.
www.evga.com/support/motherboard
- 5 -