Advertisement
Vent Control
The vent control is located above the control panel. The operation method is different
on different models (see the following figures).
For maximum cooling efficiency, CLOSE the vent. This will allow internal air circulation.
OPEN the vent to discharge stale air.
CLOSE
VENT
To open the vent, pull the lever toward
To close it, push it in.
Control Panel Cover
Grasp the right of the control panel cover and
pull it upwards to open it .
Manual vertical air flow adjustment
Air Filter
The air filter behind the inlet grille should be checked and
cleaned at least once every 2 weeks (or as necessary) to
maintain optimal performance of the air conditioner.
OPEN
To adjust vertical air flow direction of the up or low horizontal
louvers, adjust any one of the up or low horizontal louver blades.
Always keep the top or bottom blades in horizontality. This can
prevent water drops condensed on the front panel of the unit.
!
NEVER operate the air conditioner without the
air filter, as dust/dirt particles can cause
equipment failure.
To open the vent, set the lever to the right position
To close it, set the lever in the left position.
Close the control panel cover and press the
right of the cover again until it snaps into the
locked position.
CAUTION
8
CLOSE
OPEN
!
Advertisement
