Introduction, Product Features & Specifications - Kidde P4010ACLEDS-2 User Manual

5. Introduction, Product Features and Specifications
Introduction
This alarm detects products of combustion using photoelectric technology .
Ten (10) years after the unit was installed, this unit will automatically alert you that it is time to replace the unit. This is
called "End of Unit Life" mode. See Troubleshooting Guide. To help identify the date to replace the unit, a label has been
affixed to the side of the alarm. Write the "Install date" in the space provided, and then write in the "Replace by" date
(10 years from initial power up) in permanent marker on the label prior to installing the unit.
connected to obtain the full 10 year battery and unit life.
product features and Specifications:
• Temperature: Operating Range: 40°F (4.4°C) to 100°F (37.8°C)
• Humidity: Operating range: up to 95% RH non-condensing
• Audible Alarm: 85+ dB at 10' 3.0 to 3.5 KHz pulsing alarm, with voice message "Fire!"
nOte:
This is not a CO alarm, but it will receive and transmit a CO alarm signal (with voice message
"Warning! Carbon Monoxide") from an interconnected CO or combination smoke/CO alarm.
• Smoke Sensor: Photoelectric
• Voice message system
• Smoke Alarm SMART Hush® Control
• Ambient Light Sensing
• LED Strobe
• Powered by 120VAC (60 Hz, 687 mA max) wire-in connector with sealed lithium battery backup.
• Hardwire interconnectable to other compatible alarms.
• One large, user- friendly button. (Strobe dome is the button).
• Applications: Primary Direct or Indirect and Supplementary
• Light Output: 177 Candela minimum (on axis measurement)
8
nOte: AC power must be