Change Tv Preferences - Philips 42HFL3233D/10 User Manual

B: Update when prompted through
digital broadcasts
If you receive digital broadcasts (DVB-T), your
TV can automatically receive software updates.
When your TV receives a software update, it
will prompt you to update the TV software.
1
Press .
2
Select [Guest menu] > [Software settings]
> [Announcement].
3
If a message appears to prompt you
to update your software, follow the
instructions to start the update.
» The TV restarts after the software
update is complete.
4
If you do not want to update the software,
select [Guest menu] > [Software settings] >
[Clear announcement], then press OK.
Note
•
If you skip the update, you can update it manually later
(see 'C: Check for updates through digital broadcasts'
on page 27).
C: Check for updates through digital
broadcasts
You can check if there are updates available
through digital broadcasts.
1
Press .
2
Select [Guest menu] > [Software settings]
> [Check on major updates].
3
If an update is available, follow the on-
screen instructions to start the update.
» The TV restarts after the software
update is complete.

Change TV preferences

Use the preferences menu to customise your
TV settings.
1
Press .
2
Select [Guest menu] > [TV settings] >
[Preferences].
3
Select one of the following, then press OK.
• [Menu language]: Select a menu
language.
[Sleep timer]: Switch the TV to
•
[Location]: Optimise TV settings for
•
your location - home or shop.
• [E-sticker]: (For shop mode only)
Switch the e-sticker on or off.
[Volume bar]: Display the volume bar
•
when you change the volume.
[Auto switch off]: To conserve energy,
•
set the TV to switch to standby
automatically after a period of
inactivity.
This TV is also designed with other
no user interaction (such as pressing
a remote control button or a control
on the front panel) for four hours,
the TV will automatically switch to
standby.
[Channel information size]: Change
•
the type of information that is
displayed when you switch channels.
• [Universal access]: Enable or disable
the universal access menu.
[Key beep]: Enable audio feedback
•
when you press buttons on the
remote control or TV.
• [Audio out delay]: Automatically sync
the image on your TV to the audio
from a connected home theatre.
[TV position]: Apply the best settings
•
for your TV based on how it is
mounted.
• [Teletext 2.5]: Enable or disable
Teletext 2.5. (For digital TV)
[Clock]: Display or remove the time
•
from the TV, and set clock options.
EN
27