Download the software
1
On your PC, open a web browser and go
to www.philips.com/support.
2
Download the latest software upgrade
file to your PC.
3
Decompress the ZIP-file.
4
Copy the autorun.upg file to the root
directory of the USB device.
Update using a USB device
1
Connect your USB device to the USB
port at the side of your TV.
2
Press MENU > [PBS Settings] >
[Consumer Setup] > [Yes].
» The consumer menu appears.
3
to select [Software update]
Press
> [Local updates] > [USB].
4
Press OK to update the TV software
manually.
5
Follow the on-screen instructions to
complete the update.
Note
•
The TV restarts after the software update is
complete.
Disconnect a USB storage device
Caution
•
Follow this procedure to avoid damage to your
USB storage device.
1
Wait for five seconds before you
disconnect the USB storage device.
Change TV preferences
Use the preferences menu to customise your
TV settings.
1
Press MENU > [PBS Settings] >
[Consumer Setup] > [Yes].
» The consumer menu appears.
2
Press
to select [Installation] >
[Preferences].
[Location]: Optimises TV settings for
•
your location - home or shop.
[Volume bar]: Displays the volume bar
•
when you adjust the volume.
•
[EasyLink]: Enables one-touch play,
one-touch standby, and one-touch audio
between EasyLink-compliant devices.
3
Press
to select your preference.
4
Press OK.
5
Press MENU to exit.
Reset the TV to factory
settings
You can restore the default picture and sound
settings of your TV. The channel installation
settings remain the same.
1
Press MENU > [PBS Settings] >
[Consumer Setup] > [Yes].
» The consumer menu appears.
2
to select [Installation] >
Press
[Factory settings].
3
to enter [Factory settings].
Press
4
Select [Reset] to start resetting.
5
Press OK.
6
Press MENU to exit.
EN
19