Table of Contents
Advertisement
Update using a USB device
Connect your USB device to the USB port at
the side of your TV.
1
If the software update screen does not
appear automatically, select [Setup] >
[Software update] > [Local updates] .
2
Press
to update the TV software
manually.
3
Follow the on-screen instructions to
complete the update.
Note
•
The TV restarts after the software update is
complete.
Change TV preferences
Use the preferences menu to customise your
TV settings.
1
Press
.
2
Select [Setup] > [Installation] >
[Preferences] .
•
[Location] : Optimises TV settings for
your location - home or shop.
•
[Volume bar] : Displays the volume
bar when you adjust the volume.
•
[EasyLink] : Enables one-touch play
and one-touch standby between
EasyLink-compliant devices.
•
[Pixel Plus Link] : Overrides the
settings of connected devices and
uses the settings of the TV.
•
[E-sticker] : For shop mode only. Sets
the location of the e-sticker.
3
Press
to exit.
16
EN
Start a TV demo
You can use demonstrations to better
understand the features of your TV. Some
demos are not available on certain models.
Available demos are displayed in the menu list.
1
Press
on the remote control.
2
Press
to select a demo and press
to view it.
3
Press
-
to exit.
Reset the TV to factory
settings
You can restore the default picture and sound
settings of your TV. The channel installation
settings remain the same.
1
Press
.
2
Select [Setup] > [Installation] > [Factory
settings] .
3
Press
to enter [Factory settings] .
4
Select [Reset] to start resetting.
5
Press
.
6
Press
to exit.
Advertisement
Table of Contents
