Connect Power; Use Your Power Amplifier - Philips CMP200/93 User Manual

Connect power

1
Make the power connection as illustrated below:
Connect the ground wire from the car to the
•
Connect the remote wire from the car audio to the
•
socket.
√ With this connection, you can turn on/off the amplifier
with the car audio.
Connect the power wire from the car battery to the
•
socket.
to a metal point of the car
Remote output
Car audio unit
Tip
•
If your car audio does not have remote output, connect the remote input
terminal (REM) to the accessory power supply.

3. Use your power amplifier

Select crossover frequency
You can select crossover frequency mode as below:
less than 450 mm (18 in)
Fuse (60 A)
+12 V car battery
GND socket.
REM
+12V