Connect Speakers; Connect Car Audio; Connect Power - Philips CMQ405 User Manual

Connect speakers

Note
•
Use speakers with an impedance of 2 to 8 ohm
(4 to 8 ohm when used as a bridged amplifier).
•
Match the "left", "right", "+" and "-" terminals
correctly. Revised polarity may degrade sound
quality.
Option 1: Stereo mode: connect 4 speakers
4 ohm 4 ohm
4 ohm 4 ohm
Option 2: Mono bridged mode: connect
2 speaker
4 ohm speaker
4 ohm speaker
Option 3: Tri-mode: connect 6 speakers
4 ohm 4 ohm
8 ohm
4 ohm 4 ohm
8 ohm
All manuals and user guides at all-guides.com

Connect car audio

Connect the amplifier to the car audio with an
RCA cable.
LINE OUT
Car audio unit

Connect power

1
Make the power connection as illustrated
below:
• Connect the ground wire from the
car to the GND socket.
• Connect the remote wire from the
car audio to the REM socket.
• With this connection, you can turn
on/off the amplifier with the car
audio.
• Connect the power wire from the
car battery to the +12V socket.
LINE OUT
Car audio unit
EN 7