Related Manuals for Philips TDA6103Q
Summary of Contents for Philips TDA6103Q
- Page 1 DATA SHEET TDA6103Q Triple video output amplifier Preliminary specification File under Integrated Circuits, IC02 Philips Semiconductors INTEGRATED CIRCUITS March 1994...
- Page 2 1,2,3 input (3x) March 1994 GENERAL DESCRIPTION The TDA6103Q includes three video output amplifiers in one single in-line 9-pin medium power (SIL9MP) package SOT111BE, using high-voltage DMOS technology, intended to drive the three cathodes of a colour CRT. PIN POSITION...
- Page 3 Philips Semiconductors Triple video output amplifier PINNING SYMBOL DESCRIPTION inverting input 1 inverting input 2 inverting input 3 ground, fin non-inverting input supply voltage cathode output 3 cathode output 2 cathode output 1 LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). Voltages measured with respect to GND (pin 4);...
-
Page 4: Thermal Resistance
Philips Semiconductors Triple video output amplifier THERMAL RESISTANCE SYMBOL th j-fin th h-a Note 1. An external heatsink is necessary. P tot –50 (1) Infinite heatsink. (2) No heatsink. Fig.3 Power derating curves. March 1994 PARAMETER from junction to fin; note 1... - Page 5 Philips Semiconductors Triple video output amplifier CHARACTERISTICS Operating range: T = 20 to 150 C; V Test conditions (unless otherwise specified): T = 10 pF (C consists of parasitic and cathode capacitance); R SYMBOL PARAMETER quiescent supply current input bias current inverting inputs...
- Page 6 Switch-off behaviour The switch-off behaviour of the TDA6103Q is controllable. This is due to the fact that the output pins of the TDA6103Q are still under control of the input pins for . To limit the diode diode relative low-power supply voltages (approximately 30 V and higher).
-
Page 7: Test Circuit
Philips Semiconductors Triple video output amplifier Test circuit 22 F V i1 22 nF 22 F V i2 22 nF 22 F V i3 22 nF = 70 fF. March 1994 C par 100 k C par 100 k 8.2 pF V in1 0.987... - Page 8 Philips Semiconductors Triple video output amplifier V oc Fig.6 Typical low-frequency (f < 1 MHz) response of V V oc Fig.7 Output voltage (pins 7, 8 and 9) rising edge as a function of the AC input signal. March 1994 0.633...
- Page 9 Philips Semiconductors Triple video output amplifier V oc Fig.8 Output voltage (pins 7, 8 and 9) falling edge as a function of the AC input signal. March 1994 Preliminary specification overshoot (in %) MGA975 TDA6103Q...
- Page 10 3.3 k 3.3 k 3.3 k 100 k 10 F 100 k (250 V) TDA6103Q 1.5 k 1.5 k 220 nF 1.5 k 2.7 nF (500 V) 100 k 2.7 nF (500 V) optional Fig.9 Application diagram. 185 V AQUA...
- Page 11 Regarding dissipation, distinction must first be made between static dissipation (independent of frequency) and dynamic dissipation (proportional to frequency). The static dissipation of the TDA6103Q is due to voltage supply currents and load currents in the feedback network and CRT.
-
Page 12: Package Outline
Philips Semiconductors Triple video output amplifier PACKAGE OUTLINE 2.75 2.50 (2x) 6.48 6.14 1.40 1.14 Dimensions in mm. Fig.11 Plastic SIL-bent-to-DIL, medium power with fin, 9-pin (SOT111BE). March 1994 22.00 21.35 21.4 20.7 15.1 14.9 0.45 0.25 2.54 (8x) 0.67 0.50... -
Page 13: Life Support Applications
Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. - Page 14 Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q NOTES March 1994...
- Page 15 Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q NOTES March 1994...
- Page 16 Greece: No. 15, 25th March Street, GR 17778 TAVROS, Tel. (01)4894 339/4894 911, Fax. (01)4814 240 Hong Kong: 15/F Philips Ind. Bldg., 24-28 Kung Yip St., KWAI CHUNG, Tel. (0)4245 121, Fax. (0)4806 960 India: PHILIPS ELECTRONICS & ELECTRICALS Ltd., Components Dept., Shivsagar Estate, Block 'A',...