Connect power
1
Make the power connection as illustrated below:
•
Connect the ground wire from the car to the
•
Connect the remote wire from the car audio to the
•
With this connection, you can turn on/off the amplifier with the car audio.
•
Connect the power wire from the car battery to the
Less than 450mm (18 in)
+12V car battery
Tip
•
If your car audio does not have remote output, connect the remote input terminal (REM) to the accessory
power supply.
•
To avoid short circuit, cover the power socket with the supplied shield and screws after connected power
wires. See below illustration:
EN
8
Fuse (40A)
GND socket.
REM socket.
+12V socket.
To a metal point of the car
Remote output
Car audio unit