Page 1
GENUINE GRACO PARTS AND ACCESSORIES 3A4346C ProBell™ Hose Bundles Hoses and cables for ProBell Applicators See page 3 for available hose bundles. Important Safety Instructions Read all warnings and instructions in this man- ual and in those listed in Related Manuals on page 2, before using the equipment.
Hose Bundles for Electrostatic Systems Hose Bundles for Electrostatic Systems Power Fiber Solventborne Length Part Air Lines Grounding Supply Optic Fluid Lines Number (9x) Cable Cable Cable (3x) 11 m 20 m 30 m 24Z168 24Z160 24Z170 24Z711 24Z712 24Z713 Hose Bundles for Non-Electrostatic Systems Power Fiber...
General Information General Information Installation Each hose bundle comes with 9 air lines, a fiber optic Hollow Wrist Applicator Models cable, power supply cable (ES bundles), and grounding cable. Solventborne bundles come with an additional 3 (RxA2xx) fluid lines. All hose bundles come ready to connect to Hollow Wrist All hoses and cables are held with spiral wrap at the applicators.
Installation For a better fit with Standard Applicator models, use the following instructions to adjust hose bundles for installation. NOTICE o prevent damage, do not allow the fiber optic or power cable to be in tension on the ProBell or controls end of the hose bundle.
Hose Bundle Component Identification Hose Bundle Component Identification Use the instructions in the Action to Adjust column below to adjust hose bundle for use with Standard Applicator models. NOTE: Hollow wrist applicator does not require changes. Action to Adjust Bulk Hose Hose / Label Diameter/ Part...
With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.
This manual is also suitable for:
Probell 24z160Probell 24z170Probell 24z711Probell 24z712Probell 24z713 probell 25t743Probell 25t744...
Show all