Advertisement
English
Connect wires
1
1
Check the car's wirings carefully, then
connect them to the unit.
Mount in the dashboard
2
1
If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
2
Ensure that the horizontal slant of the car
dashboard opening is between 0 and 20
degrees. The unit cannot be used if the
dashboard opening's slant angle is above 20
degrees.
3
Fix the mounting brackets to the unit with
screws (supplied by the car manufacturer).
4
Slide the unit into the dashboard and fix it to
the car with four screws.
b
5
Reconnect the negative terminal of the car
battery.
Turn on
1
Press and hold /MUTE/VOL to turn on
the unit.
»
The available OSD (On-Screen Display)
languages are displayed.
2
Tap a language to select.
•
To turn off the unit, press and hold
MUTE/VOL.
Set date and time
1
Tap the upper left corner to display the
main menu.
2
Tap in the middle right side of the screen.
3
Tap [Settings].
4
Tap [Time].
»
T
he date/time setup menu is displayed.
a
Set date
1
Tap [Date].
2
Tap on the displayed date information.
3
Tap
or
to set year, month and day.
Set clock mode
1
Tap [Clock mode] .
2
Tap on [12Hr] or [24Hr] to select clock
mode.
Set time
1
Tap [Time].
2
Tap on the displayed time.
3
Tap
or
to set hour and minute.
Use map
Note
/
•
You may need to upgrade the map (sold
separately) before using it.
Advertisement
