Introduction; Direction Reference; Servicing The Engine And Drive Train Components - Scag Power Equipment SWZ Operator's Manual

INTRODUCTION

Your mower was built to the highest standards in the
industry. However, the prolonged life and maximum
efficiency of your mower depends on you following the
operating, maintenance and adjustment instructions in this
manual.
If additional information or service is needed, contact
your Scag Power Equipment Dealer.
We encourage you to contact your dealer for repairs. All
Scag dealers are informed of the latest methods to
service this equipment and provide prompt and efficient
service in the field or at their service shop. They carry a
full line of Scag service parts.
USE OF OTHER THAN ORIGINAL SCAG
REPLACEMENT PARTS WILL VOID THE
WARRANTY.
For pictorial clarity, some illustrations and figures in this
manual may show shields, guards or plates open or
removed. Under no circumstances should your mower be
operated without these devices in place.
All information is based upon product information
available at the time of approval for printing. Scag
Power Equipment reserves the right to make
changes at any time without notice and without
incurring any obligation.
USE ONLY SCAG APPROVED
RIDING ATTACHMENTS
SEE OPERATOR'S MANUAL
GENERAL INFORMATION
WARNING
FALLING HAZARD
USE ONLY SCAG APPROVED ATTACHMENTS
AND ACCESSORIES.
Attachments and accessories manufactured by
companies other than Scag Power Equipment are not
approved for use on this machine. Using unapproved
attachments, (especially "stand-up" riding attachments)
may be hazardous.
SCAG APPROVED ATTACHMENTS AND
ACCESSORIES:
GC-F4 (p/n 9002)
GC-4D (p/n 9001)
Mulch Plate (p/n 9258, 9259, 9260, 9261)
Hurricane Mulch System (p/n 9263, 9264, 9265, 9266)
Cup Holder (p/n 9240)
Hour Meter (p/n 48023)
Turbo Baffle (p/n 423955, 423956, 423957)
Blade Buddy (p/n 9212)
Flat-Free Caster Tires (9275)

DIRECTION REFERENCE

The "Right" and "Left", "Front" and "Rear" of the
machine are referenced from the operator's right and left
when standing in the normal operating position and facing
the forward travel direction.
SERVICING THE ENGINE AND DRIVE TRAIN
COMPONENTS
The detailed servicing and repair of the engine and
hydraulic pumps are not covered in this manual; only
routine maintenance and general service instructions are
provided. For service of these components during the
limited warranty period, it is important to contact your
Scag dealer or find a local authorized servicing agent of
481109
the component manufacturer. Any unauthorized work
done on these components during the warranty period
may void your warranty.
1
TM