Touch Panel Display; Led Printhead - FujiFilm Tieline Apeos C7070 Reference Manual

Do not take out or shake the Waste Toner Container before it is filled up.

Accurate detection can become no longer possible, and the toner may be spilled from the Waste Toner
Container.
With C7070/C6570, do not touch the filter surface at the leading end of Waste Toner Container. You can

get toner on your fingers.
A trouble with image quality results if the Drum Cartridge is placed under a direct sunlight or intense

fluorescent light, or if the drum surface is touched and scratched.
4.2 Cleaning Main Unit
 When wiping the main unit with a wet cloth, use a soft, moistened and tightly-squeezed cloth. The
main unit may break down if the moisture remains on it.
 Do not use chemicals such as benzine or thinner. Doing so may damage the paint or coating on
plastic parts.
Outside the Main Unit
Exterior
1.
Wipe the exterior with a soft, moistened, and tightly-squeezed cloth.
When stains cannot be removed easily, wipe them lightly with the soft cloth slightly moistened with a
thin neutral detergent solution.
2.
Wipe the moisture off with a dry soft cloth.

Touch Panel Display

Wipe lightly with a dry soft cloth.
When wiping the main unit with a wet cloth, wipe it lightly with a soft, moistened and tightly-
squeezed cloth.
Important
Wiping the panel strongly may damage the panel. Wipe lightly.

LED Printhead

When you have replaced the Waste Toner Container or Drum Cartridge, clean the LED printheads in
order to prevent density and color irregularities from occurring.
1.
Confirm that the machine is not operating, and open the
Front Cover.
4.2 Cleaning Main Unit
25