Toshiba RAS-25N4KVRG-ND Service Manual page 120

No. Part name
1) Follow the procedure item  .
Drain hose
8
2) The drain hose can be removed by removing the
3) When removing the drain hose, be careful of any
<To re-installation>
- To install the drain hose, insert the drain hose firmly
Procedures
screw securing the drain hose then secure rotate
steel plate of drain hose to out of the drain pan and
pulling out the drain hose
sharp edges of steel plate. The edges can injuries.
until the connection part contacts with heat insulator,
secure push steel plate of drain hose to
predetermined position of Drain pan then fix it by
original screw.
Insert drain hose
Screwdriver
Screws
Steel plate
Pulling drain hose
- 120 -
Remarks
Drain hose