Biomedical Life Systems BioStim NMS2 Instructions Manual page 16

8.1 Toggling through the Modes:
1) Turn the device on or (1)
2) Choose a Mode by pressing the "Mode" Key (5)
repeatedly until the mode or therapy you wish to use is displayed
on the screen.
The following diagram demonstrates the order in which pressing
the "Mode" Key (5)
(5)
CONST
Once the desired mode is displayed on the screen you may begin
stimulation by pressing the (2)
key controls the amplitude of Channel 1 and the (3)
controls the amplitude of Channel 2.
In CONST, CYCLED and RECIPR modes you may adjust the
settings before beginning stimulation.
8.2 Defining Timing Options; RAMP TIME, ON TIME OF
TIME & DELAY
The timing options include the Ramp On, Ramp Off, On Time, Off
Time & Delay and can be modified in the Cycled or RECIPR modes
(only). The device will hold the custom settings until changed or
until the device is reset to factory settings.
scrolls through the device modes.
Recipr
Cycled
Therapy Therapy
7
8
"On/Off" Key
Therapy
1
Therapy
6
or (3)
15
Therapy Therapy
2 3
Therapy Therapy
5
4
keys. The (2)
key