Biomedical Life Systems BioStim NMS2 Instructions Manual page 12

Therapy
6
Asymmetrical Biphasic Wave
PR
Therapy
7
Symmetrical Biphasic Wave
PR
Therapy
Symmetrical Biphasic Wave
PR
5.1 Batteries
In order to maintain the functional operation of the BioStim NMS²,
the batteries will have to be changed periodically. The device is
supplied with 4 AA Alkaline batteries. When batteries are running
low, a battery image will appear and flash on the bottom right
hand corner of the LCD display screen. When this image appears,
the batteries should be changed to ensure maximum performance.
If you have saved programs into the device, they will remain
stored even when the batteries are changed.
To insert batteries:
• Before opening the battery compartment, check sure that the
device is switched off.
• Flip open the battery compartment cover.
• Remove the batteries from the compartment. Gently insert the
new batteries by matching the +/- end of each battery with the +/-
symbol found inside the battery compartment.
• Flip the battery cover to the closed position.
• Remove the batteries if you do not plan to use the device for long
periods of time, otherwise leakage and damage to the device may
occur.
• Dispose of batteries in a proper manner.
Constant
10Hz PW
Cycled
35Hz PW
Cycled
35Hz PW
5. Batteries
11
Ramp On/Off
On Time
200μS Off Time
Ramp On/Off
On Time
400μS Off Time
Ramp On/Off
On Time
50μS Off Time
0
0
0
1/0
5
5
2/2
10
20