Mating Connectors; Power And Control Connections; Packaging - Agilent Technologies 87512A Operation And Service Manual

Ensure that the test kit is rmly connected to the analyzer R and A port
Note
connectors. If any of the connections are loose, the analyzer may display
erratic measurements.

Mating Connectors

The TEST PORT of the 87512A is a precision 50 type-N female connector and mates with
precision 50 type-N male connectors. The TEST PORT of the 87512B is a precision 75
type-N female connector and mates with precision 75 type-N male connectors.
Do not mate type-N 50 connectors to type-N 75 connectors or damage may
Caution
result.
The RF IN, R, and A ports of the 87512A/B are precision 50 type-N connectors which
mate with the corresponding precision type-N connectors whose dimensions conform to US
speci cation MIL-C-39012.

Power and Control Connections

Power is not required for the 87512A/B.

PACKAGING

If shipping to a Agilent Technologies service center is required, each test kit should be
repackaged using the original factory packaging materials.
Alteratively, comparable packaging materials may be used. Wrap the test kit in heavy paper
or anti-static plastic. Use sucient shock absorbing material on all sides of the 87512A/B to
provide a thick, rm cushion and prevent movement. Seal the shipping container securely and
mark it .
FRAGILE
In any correspondence with Agilent Technologies, refer to the 87512A/B by its full model and
serial number.
Installation 2-3