Ipc-R2Is / Ipc-E2Is Bios Introduction - Cybernet R2is User Manual

IPC-R2is / IPC-E2is BIOS introduction

The AMI BIOS provides a Setup utility program for specifying system configurations and
settings. The BIOS ROM of the system stores the Setup utility. When you turn on the
computer, the AMI BIOS is immediately activated. Pressing the <F2> or <DEL> key
allows you to enter the Setup utility. If you are a little bit late pressing the <F2> or
<DEL> key, POST (Power On Self-Test) will continue with its test routines, thus
preventing you from invoking the Setup. If you still wish to enter Setup, restart the
system by pressing the "Reset" button or simultaneously pressing the <Ctrl>, <Alt> and
<Delete> keys. You can also restart by turning the system Off and back On again.
Pressing the <F11> key during bootup allows you to enter the Boot menu. The following
message will appear on the screen:
DOC ID: 16001100 Page | 19