Replacing The Grease Filters; Charcoal Filter - Miele DA 6698 D Operating And Installation Instructions

Cleaning and care
Resetting the grease filter operating
hours counter
After cleaning, the operating hours
counter needs to be re-set.
 Whilst the fan is switched on, press
the Grease filter control  for
approx. 3 seconds, until only the 1 is
flashing.
The Grease filter symbol  goes out.
If you want to clean the grease filters
before the operating hours counter has
reached its maximum:
 Touch the Grease filter control  for
approx. 6 seconds, until only the 1 is
flashing.

Replacing the grease filters

Regular usage and cleaning can cause
the filter surfaces to become worn.
If you identify any damage, replace the
grease filters.
Grease filters are available to order via
the Miele Customer Service Department
(see end of these operating instructions
for contact details) or from your Miele
dealer.
36

Charcoal filter

With recirculation mode, a charcoal
filter must be fitted in addition to the
grease filters. The charcoal filter is
designed to absorb cooking odours.
The charcoal filter is fitted in the canopy
above the grease filters.
Fitting/replacing charcoal filters
 Remove the grease filter before fitting
or replacing a charcoal filter.
 Take the charcoal filter out of its
packaging.
 Press the charcoal filter into the
frame.
 Refit the grease filters.