Table of Contents
Advertisement
Quick Links
ELECTRIC X-SCOOTER
MANUAL
PLEASE BE SAFE WHEN RIDING
ALWAYS WEAR A HELMET AND OBEY ALL LAWS!
All information, images and specifications contained in this manual are
based on the latest product information available at the time of
publication. Due to improvements or production changes, there could
be discrepancies in this manual. We reserve the right to make product
changes at any time, without notice and without obligation to make the
same or similar changes to any vehicle previously built or sold.
Page1
Advertisement
Table of Contents
Related Manuals for MotoTec Vulcan
Summary of Contents for MotoTec Vulcan
- Page 1 ELECTRIC X-SCOOTER MANUAL PLEASE BE SAFE WHEN RIDING ALWAYS WEAR A HELMET AND OBEY ALL LAWS! All information, images and specifications contained in this manual are based on the latest product information available at the time of publication. Due to improvements or production changes, there could be discrepancies in this manual.
-
Page 2: Battery Maintenance And Charging Instructions
IMPORTANT BATTERY MAINTENANCE and CHARGING INSTRUCTIONS 1. You MUST charge completely prior to initial use. (Follow charging instructions in your Product Handbook) 2. Charge immediately after each use. 3. Charge before storage. You must charge every 30 days if not in use. - Page 3 IMPORTANT PLEASE READ THIS BEFORE USING THIS PRODUCT READ THIS FIRST! WARNING This product does not conform to Federal Motor Vehicle Standards and is not intended for operation on public streets, roads or highways. Serious injury can result from the unsafe operations of this product. Operator can minimize these risks by using certain safety equipment such as: safety helmet, goggles, gloves, elbow and kneepads and appropriate footwear.
-
Page 4: Safety Guide
QUICK REFERENCE SAFETY GUIDE SAFETY GUIDE The recommended minimum age for riding this scooter is 14 years old. To avoid damage to the motor and footplate, do not overload the scooter. Never ride with more than one person. ... - Page 5 PACKAGE CONTENTS Your Scooter comes with the following items in the box. Please locate all of the following: 1000w/1600w/2000w Scooter Battery Charger Tool Kit User Manual and Fuses Seat Seat Post BEFORE YOUR BEGIN Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during shipping.
- Page 6 4. Unscrew 4 bolts on the wavy footplate cover. 5. Found the red fuse holder in the battery tank under the footplate cover. Insert a 30A amp fuse into the fuse holder. Then close the footplate cover and fasten 4 bolts. ...
- Page 7 Inflating the Tires Tires are inflated when shipped, but they invariably lose some pressure between the point of manufacturing and your purchase. Using a bicycle-style tire pump equipped for a Schrader-type valve, inflate the front tire to the PSI indicated on the sidewall of the tire. Testing the Brakes To use the brakes, squeeze the levers to increase the pressure on the brake.
-
Page 8: Stopping & Braking
RIDING RIDING 1. Make sure that all of the exposed bolts and screws are tightened. 2. Raise the kickstand to its upright position. 3. Push the on/off switch (located on the left handlebar) to the ON position. 4. Put one foot on the deck of the scooter while pushing off with the other foot, gently rotate the THROTTLE GRIP, on the right side of the handlebars. -
Page 9: Adjusting The Head Unit
Large Adjustable Crescent Wrench Philips Head Screwdrivers Oil, Grease or Lubricant ADJUSTING THE HEAD UNIT The head unit will come adjusted from the factory. However, riding on rough terrain and general use may cause the head unit to become loose over time. It may be necessary to adjust the head unit from time to time. -
Page 10: Battery Care And Disposal
BATTERY CARE AND DISPOSAL Do not store the battery in temperatures above 75°F or below -10°F. BATTERY CONTAINS SEALED NON-SPILLABLE LEAD BATTERIES. BATTERIES MUST BE RECYCLED. Disposal: The product uses sealed lead-acid batteries which must be recycled or disposed of in an environmentally sound manner. Do not dispose of a lead-acid battery in a fire. -
Page 11: Troubleshooting Guide
TROUBLESHOOTING GUIDE Problem Possible Cause Solution Motor bike does not Undercharged battery Charge the battery. A new battery should have been charged for at least 18 hours before using the motor bike for the first time and up to 12 hours after each subsequent use. - Page 12 Motor bike runs Ridding condition are Use only on solid, flat clean and dry surfaces sluggishly too stressful such as pavement or level ground The tires are inflated when shipped, but they Tires are not properly invariably will lose some pressure between inflated point manufacturing...
Need help?
Do you have a question about the Vulcan and is the answer not in the manual?
Questions and answers