Table of Contents
Advertisement
Health and Safety Precautions
Hazardous Material
Ensure you read the safety notices on page 5 prior to installing your system.
Danger of exposure to hazardous materials. Contact a specialist for advice
if you suspect your building contains hazardous materials.
Power Supply
This ACTIVboard system is supplied with a universal voltage input Power Supply
Unit (PSU) branded "ACTIVboard" type number FW7400/6. This is the only
approved type of PSU for use with an ACTIVboard system. Do not connect any
other PSU to the ACTIVboard system.
The PSU does not contain any user serviceable parts and must not be opened. If
suspected to be faulty, contact an authorized Promethean service agent to obtain
a replacement PSU of the same type.
Inspect the PSU for physical damage to the casing and wiring before use.
If damage is apparent, take care to avoid contact with any potentially live parts.
Disconnect the PSU from the electrical mains supply at the wall socket and
contact an authorized Promethean service agent for advice or replacement.
The PSU is supplied with a suitable mains input lead for your specific country. It
may also be supplied with additional mains leads (in the case where the country
has more than one type mains plug). Only use the lead which is compatible with
your mains outlet socket. Do not attempt to modify the mains lead. If a
compatibility issue exists, contact Promethean or one of its service agents before
attempting to connect the unit to the mains supply.
Environmental Considerations
Operating temperature
Humidity (non-condensing)
Mains Electrical Supply
Mains electrical supply
Frequency
Current supply
32ºF to 122ºF (0ºC to 50ºC)
0% to 90%
100 to 240 Volts AC RMS
50Hz to 60Hz
300mA RMS
3
ACTIVboard User Guide
Advertisement
Table of Contents
