Page 2
: - Promethean Recommendation: e following procedures are to be carried out by a competent person on an ActivBoard that has been removed from the system Tools Needed: No Pozi Screwdriver ATTENTION Observe precautions for handling ELECTROSTATIC DISCHARGE SENSITIVE DEVICES.
Page 3
Remove the screws from the rear cover located on the bottom right hand side of the ActivBoard as shown opposite N.B. Two of the screws may be shorter in length when compared to the corner screw and these MUST be refi tted into the same original location Hint: Place the screws with the cover so that you know where they came from...
Page 5
Remove the screws from the front of the Amplifi er PCA as shown opposite Remove the Amplifi er PCA by pulling in the vicinity of the screw holes – the Amplifi er should just slide out Tx PCA Replacement Guide...
Need help?
Do you have a question about the ActivBoard 500 PRO and is the answer not in the manual?
Questions and answers